When a project is completed, dock cranes will generally be idle for a long time, which requires maintenance and upkeep of the equipment. Grab crane manufacturers remind dock cranes to be cleaned and anti-rusted in time during use.
During the inspection of dock cranes, it is necessary to check whether the surface of the entire equipment is covered with a paint film. If the paint film of the metal structure is damaged in some places during the inspection, these damaged places must be cleaned.
During the anti-rust process of dock cranes, not only the surface of the equipment needs to be rust-proofed, but also some connected metal parts need to be painted with diesel during use. This can not only remove the substances that cause equipment corrosion due to ventilation, but also form an oil film on the metal surface. Floating crane manufacturer
During the cleaning process of dock cranes, in addition to using diesel for cleaning and lubrication, the equipment also needs to be coated with a layer of lubricating oil. It is recommended to choose calcium-based or lithium-based greases, mainly because they can protect these equipment well, and these greases will be easier to remove when they are used again.
The design process of the wharf crane is different from other lifting equipment, but they are all designed and served for certain environments and operation requirements. The base of the equipment is fixed and can only move along its fixed track during operation.
The port crane manufacturer tells you that the crane of the wharf crane is installed on the chassis of the car. During use, it can work in any accessible car place. The equipment will have different design requirements under certain environmental restrictions, and it needs to continuously improve the technology during use.